CardiologyDr. Rohit GoelIschemic Heart Disease

Associate Director, Cardiology, Max Hospital, Gurugram

Part 5 of 10 in Diagnosis and Management of Ischemic Heart Disease

Emergency Drug Protocol for ST-Elevation Myocardial Infarction

September 4, 2026

Once STEMI is confirmed on the ECG, Dr. Rohit Goel walked through the exact sequence of drugs he starts before a patient ever reaches the catheterization lab.

The first steps

Obtain IV access, put the patient on bed rest and oxygen, then load aspirin (150 mg by Dr. Goel's initial description, up to 325 mg in his summary of the full protocol) together with one of three P2Y12 inhibitors if available: clopidogrel 300 mg, prasugrel 60 mg, or ticagrelor 180 mg.

Choosing between the three P2Y12 inhibitors

All three are given alongside aspirin, never as a substitute for it. Prasugrel and ticagrelor are more potent and more effective than clopidogrel, Dr. Goel noted, but carry a higher bleeding risk, so he reserves them for patients who are not elderly and do not have liver or kidney disease; clopidogrel is his default when the bleeding risk needs to stay low. Maintenance dosing after the loading dose is clopidogrel 75 mg per day, prasugrel 10 mg per day, or ticagrelor 90 mg per day.

Completing the regimen

Atorvastatin or rosuvastatin, 40 to 80 mg, is added as the statin, along with a beta blocker if the patient's blood pressure and heart rate allow it, and glyceryl trinitrate, short- or long-acting, for pain relief alongside oxygen. From here, the patient either receives heparin ahead of primary angioplasty, or is thrombolyzed if angioplasty is not available.

This article is based on a Jivo Masterclass session conducted by Dr. Rohit Goel, Principal Consultant, Cardiology, Max Hospital, Gurgaon. The article has been summarised with the assistance of an AI tool from the original masterclass recording. Watch the full Masterclass recording

Looking for a cardiology consultation or a second opinion on ischemic heart disease? Get in touch with the Jivo team

This guide is based on a live Jivo Masterclass — Dr. Rohit Goel taught doctors across Africa on June 1, 2025.

FROM THE LIVE Q&A

DR

Dr. Gadaga

What is the lag time between the onset of symptoms and ST elevation on ECG?

RG

Dr. Rohit Goel

Once symptoms begin, the earliest ST elevation can appear on ECG within 15 to 30 minutes. This ST elevation persists if there is complete occlusion of the artery, and can still be present up to 48 hours later. If blood flow is restored spontaneously, whether from medicines or other reasons, the ST elevation resolves; otherwise it persists until the artery is reopened.

See all 8 questions from this masterclass →

Book a Consultation with Dr. Rohit Goel

Book on WhatsApp

Or message us on WhatsApp: +91 98182 98669

Frequently Asked Questions

What is the mortality rate for patients with ST-elevation MI?

Mortality in ST-elevation MI can be quite high if the patient is not treated properly, up to 30 to 50%, which is why adequate and timely treatment matters so much. Cardiac echo, alongside ECG and cardiac enzymes, is very important and can pick up early signs of heart damage; it is now one of the first-line investigations at tertiary care hospitals in suspected cases.

Is cardiac ultrasound of no importance in ischemic heart disease, and could you give a summary of its management?

Cardiac echo is important and is now done routinely, alongside cardiac enzymes and ECG, in suspected cases of heart attack at every tertiary care hospital where it is available. In summary, once ischemic heart disease is confirmed, every patient is loaded with aspirin (325 mg) along with clopidogrel (300 mg), prasugrel (60 mg) or ticagrelor (180 mg), a statin (atorvastatin or rosuvastatin, 40 to 80 mg), a beta blocker if blood pressure and heart rate allow, and glyceryl trinitrate for pain relief alongside oxygen. From there, ST-elevation MI patients receive heparin ahead of primary angioplasty, or are thrombolyzed if angioplasty is unavailable; non-ST-elevation MI and unstable angina patients are managed medically with low molecular weight heparin or fondaparinux instead of thrombolysis, and are escalated to coronary angiography and angioplasty or bypass surgery if they are high-risk or not improving.

Can myocardial bridging cause acute coronary syndrome, or can it be a risk factor?

Myocardial bridging can cause chest pain and can act as a risk factor. The initial approach is medical management with beta blockers, calcium channel blockers or nitrates. If the patient's chest pain continues despite medication, the next step is bypass surgery rather than angioplasty, since angioplasty is not successful in a bridged segment of artery.

What is the safety of these ACS drugs in pregnancy?

Aspirin, clopidogrel, statins and beta blockers are all safe in pregnancy and can be used without hesitation. Low molecular weight heparin is also safe. ACE inhibitors should not be given, and thrombolysis is contraindicated outright in pregnant patients; these patients should instead be referred for primary angioplasty. The mother's life takes priority, though the fetal risk should be explained to the family before proceeding.

Can you elaborate more on glycoprotein 2b3a inhibitors and low molecular weight heparin?

There are three glycoprotein 2b3a inhibitors: abciximab, tirofiban and eptifibatide. These were used far more commonly a decade ago, before stents and catheterization labs were as standardized and widely available as they are now. Today their use has decreased and they are reserved for high-risk patients, such as those with a high thrombotic burden or delayed presentation, because of the increased risk of bleeding in the brain, stomach and at the local puncture site.

Which P2Y12 inhibitor does Dr. Goel prefer in STEMI?

He uses clopidogrel as his default because it carries a lower bleeding risk. Prasugrel and ticagrelor are more potent but reserved for patients without elevated bleeding risk, such as those who are not elderly and have no liver or kidney disease.

What is the full initial drug protocol for a confirmed STEMI?

Aspirin, one P2Y12 inhibitor (clopidogrel, prasugrel or ticagrelor), a statin, a beta blocker if blood pressure and heart rate allow, and glyceryl trinitrate for pain relief, alongside oxygen and IV access.

Need Expert Medical Guidance?

Connect with leading specialists through the Jivo Healthcare network for personalized advice.

Get Expert Opinion